iFootage Motion S1A3 Bundle B2

€2,299.99
  • In stock
Qty:

  • iFootage Motion S1A3 Bundle B2
  • iFootage Motion S1A3 Bundle B2
  • iFootage Motion S1A3 Bundle B2
  • iFootage Motion S1A3 Bundle B2
  • iFootage Motion S1A3 Bundle B2
iFootage Motion S1A3 Bundle B2

Recommended iFootage Products

iFootage Shark Slider S1 (Standard)
iFootage Shark Slider S1 (Standard)
€499.99
iFootage Shark Slider S1 (Bundle)
iFootage Shark Slider S1 (Bundle)
€569.99

Add buySlider Protection Plan

Recommended Tripods

Wireless Motion Controller S1A3

iFootage Wireless Motion Controller S1A3

Full motion wireless system

By combining Motion X2 and S1A1 mounted on a Shark slider S1, we managed to get a full motion wireless control system. It allows camera movements on two axis: 90° tilt and 360° pan. The system provides steady and automatic movements for time-lapses and shooting while panning as well as panoramas. Its main components are the wireless shutter controller, the electronic motor section, the wireless motorised controller and the Motion X2.


iFootage Wireless Motion Controller S1A3 for Shark

A completely programmable system

Just like S1A1, S1A3 is completely programmable being able to register up to 9 different tracks with pre-recorded movements. The tracks are easily accessible from the data packet and can be reused as needed. With repeated moves at different lengths of time, a wide range of visual effects can also be achieved easily. In addition, the S1A3 offers 'Manual Mode' which is perfect for run-and-gun style without losing precision. Its user friendly interface allows you to grab shots on-the-fly with no pre-programmed motion control.

Time lapse and stop motion

iFootage Single Axis' strength is the time-lapse shoot and 360° panoramas. It controls the time-lapse by the number of stills as well as length of time. It has an Ease In/Out function and a Preview setting which helps users understand the video effect before shooting therefore increasing their success rate. Stop motion is also made easy with the S1A3. All you have to do is set up the number of frames and the time and then simply advance through each position to achieve a flawless end product. Our system perfectly integrates with Autopano, allowing you to create beautiful 360° panoramic images. Also the system allows you to do simple parallax adjustments for various cameras.

Time-lapse

360° panoramas

Just like you would use the system for time-lapses, you could just as much use it to create beautiful 360° panoramic images, or videos with the ability to shoot in any angle. Autopano software is the perfect companion for a videographer that shoots panoramas.

iFootage Wireless Motion Controller S1A3 360 Panoramas

Built-in quality

The build quality of S1A3 is noticeable improved. It performs flawlessly in extreme environments withstanding even the harshest of conditions. Solid aluminium and quality craftsmanship are trademarks of iFootage products, and this system benefited fully from this. It is solid and sturdy, supporting a maximum load of 8kg. It has a working time of approximately 12 hours in a continuous video shoot or about 16 hours in time-lapse mode.

iFootage Wireless Motion Controller S1A3 Built-in quality

iFootage Motion S1A3

Get Your Camera Slider at buySlider - Lowest Price in Europe Guaranteed!


 iFootage Motion S1A1Bundle
Speed Range0mm/s - 160mm/s
Location Accuracy0.00325mm
Motor Power8-32W
Speed regulationStepless speed / step speed
Radio Frequency2.4GHz
Maximum vertical load8kg
Operating Voltage14.8~24V
Induction distance20m
Weight1.1kg

X2 Motion
Rotation speed 0-40°/s
Location accuracy0.0025°
Motor power8-32W
Speed regulationStepless speed / step speed
Operating voltage 14.8~24V
Radio frequency2.4GHz
Induction distance20m
Optimum load4kg
Maximum load8kg
Weight 2.5kg

Wireless Controller
Radio frequency2.4GHz
Operating voltage3.7V
Endurace time50h
Weight 0.4kg
Induction distance20m
PowerBuilt-in Rechargeable lithium battery

Shutter Section
Radio frequency2.4GHz
Operating Voltage3V
Endurance time50h
Weight 0.04kg
Induction Distance20m
Power2*AAA battery (LRG)

iFootage Complete Slider Bundle Contains
1 x Pan & Tilt Head
1 x 75X50X10
2 x 1/4'' screw
1 x Plate base
1 x connection block A
1 x connection block B
4 x Club screw
1 x Power connection wire
1 x Limited Block 
1 x 3/8'' screw
1 x 1/4''screw
1 x Antenna
1 x Electronic Motor Section
1 x Timing wheel
2 x Screw
1 x Wireless Motor Controller
1 x USB Connection
7 x Shutter Cable
2 x Power Cable
2 x Battery
1 x Charger
1 x Handcase
1 x Instruction Manual
1 x Warranty Card
1 x Certificate




 Customer ratings and reviews 
 (5/5)  - 4 ratings - 3 reviews
View distribution
By on  04 Dec. 2017 (iFootage Motion S1A3 Bundle B2) :
(5/5
The customer has rated the product but has not posted a review, or the review is pending moderation.
By on  30 Aug. 2017 (iFootage Motion S1A3 Bundle B2) :
(5/5

I am speechless again :)

I needed a couple of hours to get used to the whole system. However, it is very easy after using it for 2-3 hours. I am planing to use this kit for mainly B rolls for interviews. I am amazed how quite the whole system is. Tested also for vertical shots and saw that the motor is super strong. I think this kit is one of the best motion control solutions in it's category.

By on  20 July 2017 (iFootage Motion S1A3 Bundle B2) :
(5/5

Expensive toy

i bought this as a complete pack with shark slider, and damn, the price was high. but when i started playing with it, i fell in love. i'm shooting weddings and stock videos, so there is no doubt it will pay for itself. (right now it shoots timelapse of my cat). easy to setup, and control, it's really quiet and you have suddenly milion new options how to do your frames. downside is big weight of the whole set and high price. but i don't care, i just love my new toy!!!

By on  14 June 2017 (iFootage Motion S1A3 Bundle B2) :
(5/5

Cool Setup

I used it during the last interview shooting for tracking our subject and i was very pleased with sound performance. We used a lav mic, but even audio from my camera could be cleaned and used!