iFootage Complete S1 Slider Bundle

€2,799.99
  • Out of stock  More on the way (Ships in 2-3 weeks)
Qty:

  • iFootage Complete S1 Slider Bundle
iFootage Complete S1 Slider Bundle

Add buySlider Protection Plan

Recommended Tripods

Recommended Heads

iFootage Complete S1 Slider Bundle

Master package for full motion control


iFootage Complete S1 Slider Bundle

Get Your Camera Slider at buySlider - Lowest Price in Europe Guaranteed!

iFootage Shark Slider S1 Bundle

(With 550mm Extension Rails)

iFootage Shark Slider S1

What's in the box?

iFootage Shark Slider S1
550mm Extension Rails
Fly Wheel
Carry Case

iFootage Shark Slider S1

Modular design

iFootage understands the importance of a product's build so we removed excess mass, dramatically reducing its weight and size. This design tweak makes our product increasingly convenient and less cumbersome to photographers who need to pack and deploy the unit frequently.

These so called 'sharks' can be separated from each part in 10 seconds, taking only three minutes to complete the entire installation. It is easy to carry around and even easier to clean its components.It also benefits from modular design which means that there is no need to buy another setup for different scenarios.


iFootage Shark Slider Modular Design

iFootage Shark Slider High Quality Components

High quality components

The Japan imported silent bearings last about five times longer than standard bearings, even with constant use over prolonged periods of time. Also imported, the synchronous belts provide high precision and torque, with excellent performance even in high load situations. The carbon fibre tubes and the three wheel locking system, make it almost impossible to be bent out of shape when the manufacturer load limit is respected. By far more robust than a traditional slider, iFootage Shark Slider S1 benefits from increased resistance and can be used under any weather conditions.

Extendable design

iFootage Shark Slider S1 comes in a standard package as well as a bundle. If you purchase the extended version or the bundle, your slider can become as long as 1,200mm or 1,800mm (from the original 790mm) with the help of the extension tubes.

* You are currently viewing the iFootage Shark Slider S1 Bundle which comes with a set of 550mm extension rails.

Smooth camera movement

The flywheel provides a damping effect through its centrifugal force, allowing you to have smooth acceleration/deceleration for the camera movement. The belt and the synchronising wheel are perfectly connected to avoid any vibrations caused by the movement. Having a triangle structure means the slider gets maximum stability.

iFootage Shark Slider Flywheel
iFootage Shark Slider S1 Bottom Plate

The bottom plate is equipped with support screws so the structure doesn't wobble when the slider is mounted on the tripod. If smooth and quiet video shoots are what you're looking for, then the shark slider offers the perfect solution.

Wireless Motion Controller S1A3

iFootage Wireless Motion Controller S1A3

Full motion wireless system

By combining Motion X2 and S1A1 mounted on a Shark slider S1, we managed to get a full motion wireless control system. It allows camera movements on two axis: 90° tilt and 360° pan. The system provides steady and automatic movements for time-lapses and shooting while panning as well as panoramas. Its main components are the wireless shutter controller, the electronic motor section, the wireless motorised controller and the Motion X2.



iFootage Wireless Motion Controller S1A3 for Shark

A completely programmable system

Just like S1A1, S1A3 is completely programmable being able to register up to 9 different tracks with pre-recorded movements. The tracks are easily accessible from the data packet and can be reused as needed. With repeated moves at different lengths of time, a wide range of visual effects can also be achieved easily. In addition, the S1A3 offers 'Manual Mode' which is perfect for run-and-gun style without losing precision. Its user friendly interface allows you to grab shots on-the-fly with no pre-programmed motion control.

Time lapse and stop motion

iFootage Single Axis' strength is the time-lapse shoot and 360° panoramas. It controls the time-lapse by the number of stills as well as length of time. It has an Ease In/Out function and a Preview setting which helps users understand the video effect before shooting therefore increasing their success rate. Stop motion is also made easy with the S1A3. All you have to do is set up the number of frames and the time and then simply advance through each position to achieve a flawless end product. Our system perfectly integrates with Autopano, allowing you to create beautiful 360° panoramic images. Also the system allows you to do simple parallax adjustments for various cameras.

Time-lapse

360° panoramas

Just like you would use the system for time-lapses, you could just as much use it to create beautiful 360° panoramic images, or videos with the ability to shoot in any angle. Autopano software is the perfect companion for a videographer that shoots panoramas.

iFootage Wireless Motion Controller S1A3 360 Panoramas

Built-in quality

The build quality of S1A3 is noticeable improved. It performs flawlessly in extreme environments withstanding even the harshest of conditions. Solid aluminium and quality craftsmanship are trademarks of iFootage products, and this system benefited fully from this. It is solid and sturdy, supporting a maximum load of 8kg. It has a working time of approximately 12 hours in a continuous video shoot or about 16 hours in time-lapse mode.

iFootage Wireless Motion Controller S1A3 Built-in quality
 iFootage Shark Slider S1 Bundle
MaterialsCarbon fiber, Anodized aluminum SUS304
Weight3.4kg (with pulley)
Tube Diameter22mm
Max Length790mm / 1340mm with extension tubes
Camera Travel Distance500mm / 1060mm with extension tubes
Max Load7kg
Package IncludesiFootage Shark Slider S1
550mm Extension Rails
Fly Wheel
Carry Case

 iFootage Motion S1A1Bundle
iFootage S1A1
Speed Range0mm/s - 160mm/s
Location Accuracy0.00325mm
Motor Power8-32W
Speed regulationStepless speed / step speed
Radio Frequency2.4GHz
Maximum vertical load8kg
Operating Voltage14.8~24V
Induction distance20m
Weight1.1kg

X2 Motion
iFootage X2 Motion
Rotation speed 0-40°/s
Location accuracy0.0025°
Motor power8-32W
Speed regulationStepless speed / step speed
Operating voltage 14.8~24V
Radio frequency2.4GHz
Induction distance20m
Optimum load4kg
Maximum load8kg
Weight 2.5kg

Wireless Controller
Radio frequency2.4GHz
Operating voltage3.7V
Endurace time50h
Weight 0.4kg
Induction distance20m
PowerBuilt-in Rechargeable lithium battery

Shutter Section
Radio frequency2.4GHz
Operating Voltage3V
Endurance time50h
Weight 0.04kg
Induction Distance20m
Power2*AAA battery (LRG)

iFootage Complete Slider Bundle Contains
1x iFootage Shark Slider S1
1x 550mm Extension Rails
1x Fly Wheel
1x Carry Case
1 x Pan & Tilt Head
1 x 75X50X10
2 x 1/4'' screw
1 x Plate base
1 x connection block A
1 x connection block B
4 x Club screw
1 x Power connection wire
1 x Limited Block 
1 x 3/8'' screw
1 x 1/4''screw
1 x Antenna
1 x Electronic Motor Section
1 x Timing wheel
2 x Screw
1 x Wireless Motor Controller
1 x USB Connection
7 x Shutter Cable
2 x Power Cable
2 x Battery
1 x Charger
1 x Handcase
1 x Instruction Manual
1 x Warranty Card
1 x Certificate




 Customer ratings and reviews 
 (5/5)  - 1 ratings
View distribution
By on  22 June 2018 (iFootage Complete S1 Slider Bundle) :
(5/5
The customer has rated the product but has not posted a review, or the review is pending moderation.